2020年12月28日月曜日

ebayオークションに出品されたB43核兵器の部品, B43 Nuclear Weapon Component on ebay auction

ebayオークションに出品されたB43核兵器の部品, B43 Nuclear Weapon Component on ebay auction






Update:2020.12.28




ebayに、本物の核兵器の部品(ノーズコーン)が出品され、最終的にUS $1,275で落札された。B43核爆弾解体時に作成されたノーズコーンの記念品という説明だが、なかなかのレアアイテムである。こういう通常、市場に供給されないアイテムがオークションに出てくるということは、マニアがお金に困ってる証拠であり、不景気の指標となる。コロナ禍の経済状況は、悪い方向に進んでる様だ。



        






1. ebayに出品された本物の核兵器の部品


ebayに、本物の核兵器の部品(ノーズコーン)が出品され、最終的にUS $1,275で落札された。B43核爆弾解体時に作成されたノーズコーンの記念品という説明だが、なかなかのレアアイテムである。







ebayに出品されたB43核爆弾


オークション説明文は、以下とのこと。

This is a genuine nose cone from a B-43 thermonuclear bomb. As the cold war wound down, many nuclear weapons were dismantled, and a few parts were not recycled but were saved for their historical value and collector interest. The existence of this part is a testament to the success of significant disarmament. This particular nose cone is number 003 of 33 which were made available to collectors. Condition as shown in photos. It stands bout 26 ½ inches tall, has a diameter of about 14 inches at the base, and weighs about 14 pounds. It's weight and size make it costly to ship – see shipping. Shipping to U.S. only.


B-43熱核爆弾(水爆)の純正ノーズコーンです。冷戦の終結とともに多くの核兵器が解体され、一部のパーツはリサイクルされずに歴史的価値とコレクターの興味から保存されました。この部品の存在は、重要な軍縮の成功の証である。このノーズコーンはコレクターが入手できるようになった33個のうちの003個目である。写真のような状態。高さは26インチ半、底部の直径は約14インチ、重さは約14ポンドです。それは重量とサイズのため、それを出荷するために高価になります - 送料を参照してください。米国のみへの配送。



B43は米国が開発・運用していた核爆弾であり、空軍、海軍の幅広い軍用機に搭載可能であった。B43はロスアラモス国立研究所で開発れ、1961年より生産開始を開始。1965年までに1,000発が生産された。直径は45cm、全長は3.81~4.15m、重量は935~960kg。核出力は可変であり、70キロトン~1メガトンである。減速用パラシュートを持っており、着発、レイダウン投下、空中爆発の選択が可能であった。1972年から段階的に退役が進められ、1980年代には保管状態となり、完全退役したのは1991年である。







出品物のプレートには、次のように書かれている。

「THIS NOSE ASSEMBLY IS A GENUINE PART OF A DISMANTLED MODEL B-43 THERMONUCLEAR WEAPON. THE FACT THAT THIS WEAPON WAS DISARMED AND SCRAPPED STANDS AS A TESTIMONY TO SUCCESS IN THE "COLD WAR" BY THE UNITED STATES. THIS PART IS NUMBER 003 OF 063 WHICH ARE AVAILABLE AS COLLECTORS ITEMS.」

「このノーズアッセンブリは、解体されたB-43型熱核兵器の純正部品である。この兵器が破壊されていて、スクラップされたという事実は、米国による "冷戦 "での成功を証明しています。この部分は、コレクターズアイテムとして販売されている063の003番です。」

63個解体してノーズコーンの記念品を作った内の一つがこの出品物ということである。東側諸国に対して、冷戦を勝利で終結させたという主張もプレートの意味合いとしてあるのだろう。


B43 nuclear bomb War Eagles Air Museum Santa Teresa New Mexico



War Eagles Air Museumに展示されてある実物と、今回の出品物を比較すると、形状が同じであり、本物の部品であることが判断できる。







写真から分かるノーズコーンの詳細構造として、ノーズの先端は、レーダーによる高度計を搭載しているためか、レーダーを等価可能なゴム素材の様な材質で出来ていることが伺える。また、多くのミサイルと同じ様に、ネジの取り付け方向は、核爆弾の機体に対して機軸方向である。これは、垂直方向にネジを取り付けると、搭載母機が大きな機動をした時に剪断力が働くため、この様な仕様になっていると考えられる。ネジを固定する箇所は、ノーズコーン内部先端とリンクしているような構造となっている。







2. ネットオークションは不景気の指標


この様なアイテム、言い換えると、通常、市場に供給されないアイテムがオークションに出てくるということは、マニアがお金に困ってる証拠であり、不景気の指標となる。コロナ禍の経済状況は、悪い方向に進んでる様だ。(出品者は、Santa Fe, New Mexicoだから、ロスアラモス国立研究所の関係者か研究者と見られる。)

筆者個人が独自に提唱する景気指標として、オークション指標がある。景気が悪いと以前と比べて、ネットオークションに珍しい物が出る。手放したくない物が出回るのは、皆金に困っているということ、つまり不景気という事だ。リーマンショック後の2009-2011年は、その傾向を見て取れた。最近徐々にその傾向が出てきたので、コロナウイルスによって不景気になってると言える。




References


[1] Nose cone of a B-43 thermonuclear weapon nuclear bomb hydrogen atomic, https://www.ebay.com/itm/143872661020












A real nuclear weapon part (nose cone) was put up for sale on ebay for US $1,275, described as a memento of the nose cone made when the B43 nuclear bomb was dismantled. The fact that an item like this, which is not normally available in the market, comes up in auctions is a sign that enthusiasts are in need of money, and is an indicator of a recession. The economic situation of the Corona disaster seems to be going in the wrong direction.



        




1. Authentic nuclear weapon parts listed on ebay


An authentic nuclear weapon part (nose cone) was sold on ebay for US $1,275, which is described as a memento of the nose cone made when the B43 nuclear bomb was dismantled.








B43 nuclear bomb listed on ebay




The auction description is as follows.

This is a genuine nose cone from a B-43 thermonuclear bomb. As the cold war wound down, many nuclear weapons were dismantled, and a few parts were not recycled but were saved for their historical value and collector interest. The existence of this part is a testament to the success of significant disarmament. This particular nose cone is number 003 of 33 which were made available to collectors. Condition as shown in photos. It stands bout 26 ½ inches tall, has a diameter of about 14 inches at the base, and weighs about 14 pounds. It's weight and size make it costly to ship – see shipping. Shipping to U.S. only.



The B43 was a nuclear bomb developed and operated by the U.S. and could be carried on a wide range of Air Force and Navy aircraft. the B43 was developed at Los Alamos National Laboratory and began production in 1961. 1,000 bombs were produced by 1965. It was 45 cm in diameter, 3.81 to 4.15 meters long, and weighed 935 to 960 kg. Its nuclear power was variable, ranging from 70 kilotons to 1 megaton. They had a parachute for deceleration, and could be used for landing, laydown drop, or aerial detonation.








The plate was written as follows.

"THIS NOSE ASSEMBLY IS A GENUINE PART OF A DISMANTLED MODEL B-43 THERMONUCLEAR WEAPON. THE FACT THAT THIS WEAPON WAS DISARMED AND SCRAPPED STANDS AS A TESTIMONY TO SUCCESS IN THE "COLD WAR" BY THE UNITED STATES. THIS PART IS NUMBER 003 OF 063 WHICH ARE AVAILABLE AS COLLECTORS ITEMS."


This means that this exhibit is one of the 63 pieces that were dismantled to make the nosecone memorabilia. It is likely that the plate is also meant to assert to the eastern countries that they ended the Cold War with victory.


B43 nuclear bomb War Eagles Air Museum Santa Teresa New Mexico



Comparing the actual item on display at the War Eagles Air Museum with the one on display here, we can determine that the shape is the same and that it is an authentic part.







The detailed structure of the nose cone, as seen in the photo, suggests that the tip of the nose is made of a rubber-like material that is radar-equivalent, probably because it is equipped with a radar altimeter. Also, as with most missiles, the screws are installed in the direction of the axis of the nuclear bomb's body. This is because if the screws are attached vertically, the shearing force will act on the mother plane when it makes a large maneuver, so it is thought that the screws are designed in this way. The point where the screw is fixed is linked to the inside tip of the nose cone.







2. Auctions are an indicator of recession


The fact that such items, or in other words, items that are not normally available in the market, appear in auctions is a sign that enthusiasts are in need of money, and an indicator of a recession. The economic situation of the Corona disaster seems to be going in the wrong direction. (The seller is from Santa Fe, New Mexico, so he must be from Los Alamos National Laboratory or a researcher.

The author has his own economic index, the auction index. When the economy is bad, more rare items appear in online auctions than before. The fact that items that people don't want to part with are available means that people are in need of money, which means that the economy is in recession. We could see this trend in 2009-2011 after the Lehman shock. Recently, this trend has been gradually emerging, so we can say that we are in a recession caused by the coronavirus.



References

[1] Nose cone of a B-43 thermonuclear weapon nuclear bomb hydrogen atomic, https://www.ebay.com/itm/143872661020



2020年12月26日土曜日

ロケットエンジンのクリスマスツリー, Rocket Engine Christmas Tree

ロケットエンジンのクリスマスツリー,
Rocket Engine Christmas Tree



Update:2020.12.26




クリスマスの季節、ロケットエンジンでクリスマスツリーを作るのが流行っている。皆さんも、ロケットエンジンを手に入れた際は、是非クリスマスツリーを作ってみて下さい。



        







イーロンマスクは、2019年のクリスマスシーズンにRaptorロケットエンジンをクリスマスツリー仕様にデコレートした画像をアップロードした。










これが筆者が知る限りで、最初のロケットエンジンクリスマスツリーの事例であった。

アメリカでは、個人がアンティーク的コレクションとしてロケットエンジンを所有する趣味が存在し、マイロケットエンジンを持っている人も少なくない。2020年は、SpaceXのロケットエンジンクリスマスツリーに触発された人が、SNS上で、ロケットエンジンクリスマスツリーを作って披露する人が出て来た。










こちらは、エンジニアでコレクターである、rocketpoweredkeith (@nospamkpb)氏がデコレーションした、ロケットエンジンクリスマスツリーである。Rocketdyne XLR-105 初期のアトラスロケット/アトラスICBMの補助エンジンをデコレーションしている。



これに続き、SpaceXの副社長、ロケットエンジン設計エンジニアであるトムミュラー氏が投稿した画像が下記である。











デコレーションされているのは、開発初期のMerlin1Aロケットエンジンと見られる。このエンジンは、アブレーション冷却式であり、CFRP製の幅広な燃焼室も、エンジンの特徴である。




また、宇宙ベンチャーのFirefly Aerospaceでは、ロケットのフェアリングの中にクリスマスツリーを格納して、投稿している。







ロケットエンジンに限らず、ジェットエンジンでも、車のエンジンでも、本棚でも、TVでも、PCでも、コンピュータでも、何でもLED電飾を巻き付ける事によって、クリスマスツリーにすることが可能である。筆者も、以下2種類のLED電飾をAmazonで買ってみた。




 



このLED電飾は、昔ながらの電球電飾の様にケーブルがきっちりしており、家庭用コンセントで作動する。最大1000球まで連結できる拡張性もあり、しっかりとした作りである。室内で作動させるなら良い品である。





 


この製品は、極めて安価であり、リモコン式、IP67の防水性があるとされている。実際、乾電池で作動するため、屋外でも使用可能である。しかしながら、作りは非常に雑である。2本の銅線をむき出しで製造している。むき出しの銅線に対して、各LED並列につなぐことで、光らせる仕様である。一見感電しそうだが、乾電池2本の電流・電圧だから気にしないといったところか。1シーズンの使い捨てとして、安く済ませたいのなら、この製品でも十分であろう。


References
[2] SpaceX's "Christmas tree" is a Raptor engine for the holidays, https://www.teslarati.com/spacex-starship-engine-raptor-milestone-festive-decorations/








During the Christmas season, it has become popular to make Christmas trees with rocket engines. If you have a rocket engine, please try to make a Christmas tree with it.



       






Elon Musk uploaded an image of a Raptor rocket engine decked out as a Christmas tree for the 2019 Christmas season.






As far as I know, this was the first example of a rocket engine Christmas tree.


In the United States, there is a hobby of owning rocket engines as an antique collection, and many people have their own rocket engines. In 2020, people inspired by SpaceX's rocket engine Christmas tree will be making and showing off their own rocket engine Christmas trees on social media.





This is a rocket engine Christmas tree decorated by rocketpoweredkeith (@nospamkpb), an engineer and collector. The tree is decorated with the auxiliary engines of early Atlas rockets and Atlas ICBMs.



This was followed by the following image posted by Tom Muller, SpaceX's vice president and rocket engine design engineer.






The decorated engine is believed to be a Merlin 1A rocket engine in the early stages of development. This engine is ablative cooled, and the wide combustion chamber made of CFRP is also a feature of the engine.



Also, Firefly Aerospace, a space venture company, has posted a Christmas tree stored in the fairing of a rocket.






Not only rocket engines, but also jet engines, car engines, bookshelves, TVs, PCs, computers, and anything else can be made into a Christmas tree by wrapping LED lights around it. I bought the following two types of LED lights from Amazon.




 


The LED lights have a tight cable like the old-fashioned bulb lights, and can be operated by a household outlet. It is also expandable to connect up to 1000 bulbs and is well made. It is a good product for indoor use.






 


This product is extremely inexpensive, remote controlled, and is supposed to be IP67 waterproof. In fact, it can be used outdoors because it runs on dry batteries. However, it is very poorly made; it is made from two bare copper wires. Each LED is connected to the bare copper wire in parallel to make it glow. If you want to use it cheaply as a disposable product for one season, this product will be sufficient.